Soot, smoke, and charred framing handled by a licensed crew

Attic Fire Restoration in LA JOLLA, California

Attic fire restoration in LA JOLLA, California begins the moment the fire truck leaves. We pull charred insulation, neutralize smoke odor at the source, and rebuild the framing and roof deck so your home passes inspection. Whether the fire started in a ceiling fan, a recessed light, or old knob-and-tube wiring, our crew documents every board before we touch it. Call (833) 929-6186 and we will be on site the same day.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration near me in LA JOLLA, California
Careful work. Honest options.
About this service

What Attic Fire Restoration in LA JOLLA, California Involves

Attic fire restoration in LA JOLLA, California is the licensed trade of removing fire damage from the space above your ceiling, then rebuilding it to code. Attics burn hot and slow because there is nowhere for the heat to go. A small electrical arc in a junction box can smolder inside blown-in insulation for 20 minutes before anyone smells it. By the time flames show, the roof deck is charred, the rafters are compromised, and every cubic foot of insulation is holding soot. Restoration means pulling all of that out, cleaning the framing down to bare wood, and rebuilding the assembly so the attic vents and insulates the way it did before.

Most LA JOLLA attic fires we see start in one of three places: a recessed can light buried under insulation, a failed attic fan motor, or old wiring that has been baking at 140 degrees all summer. The coastal fog does not help. Moisture cycles in from the marine layer, then the sun bakes it out, and that expansion and contraction works on 60-year-old insulation until it fails. If you searched for attic fire restoration near me LA JOLLA California at 2 a.m., you already know the smell does not wait for morning. We answer 24/7 and we bring the thermal imaging camera on the first trip.

  • ✓ Stops Odor at the Source
  • ✓ Protects the Roof Deck
  • ✓ Catches Hidden Mold Early
  • ✓ Keeps the Insurance Claim Clean
What's included

What Our Attic Fire Restoration Includes

Every attic fire job we write covers the full path from board-up to final inspection. Here is what is in the standard scope, and what we add when the damage calls for it. We price it upfront after the inspection, and you get the written scope before any demo starts.

✓

Emergency Board-Up and Tarp

Open roof penetrations and vent holes get sealed the same day, and we tarp the deck if weather is coming. This is included on every job because an open attic invites water damage on top of the fire damage.

✓

Thermal Inspection and Written Scope

A thermal imaging camera and moisture meter map the damage, and you get a written Xactimate scope within 24 hours. The photo set and moisture log go to you and your adjuster at the same time.

✓

Soot, Char, and Insulation Removal

We bag and haul the damaged insulation, HEPA vacuum the framing, and clean the char down to bare wood with soot sponges and degreaser. Negative air machines keep the rest of the house clean while we work.

✓

Deodorization and Structural Drying

Hydroxyl generators run 24 to 72 hours to break down smoke odor, and industrial dehumidifiers pull the firefighting water out of the ceiling cavity. We do not pull equipment until the framing reads dry on the meter.

✓

Framing, Decking, and Insulation Rebuild

Sistered rafters, new roof decking, fresh insulation, and drywall go back in to California Building Code. We pull the permits and meet the inspector, so the repair is documented and your roof warranty stays intact.

✓

Final Walkthrough and Warranty

We walk the attic with you at the end, hand over the final moisture readings and permit sign-off, and back the workmanship in writing. If the odor comes back inside the warranty window, we come back at no charge.

How it works

How Our Attic Fire Restoration Process Works

01

Emergency Board-Up

We arrive, secure any open roof or vent penetration, and tarp the deck if rain is coming. This is also when we shut off the attic circuit at the panel and tag it. Expect 60 to 90 minutes on site for this first trip, and we do not charge for the inspection.

02

Inspection and Scope

A thermal imaging camera and moisture meter map the damage past what your eyes can see. We photograph every charred rafter, every wet batt of insulation, and every smoke-stained surface. The written scope goes to you and your adjuster within 24 hours, priced in Xactimate so the numbers line up with the carrier's.

03

Soot and Debris Removal

We bag and haul the damaged insulation, then HEPA vacuum the framing and deck. Soot sponges and a degreaser handle the stubborn residue on the rafters. Negative air machines with HEPA filtration keep the rest of the house from getting dusted while we work. This phase runs two to four days on a typical 1,200 square foot attic.

04

Deodorization and Drying

Hydroxyl generators run 24 to 72 hours to break down smoke molecules, and industrial dehumidifiers pull the firefighting water out of the ceiling cavity. We check moisture readings daily and do not pull equipment until the framing reads dry. Ozone is used only in unoccupied spaces, never while you are home.

05

Rebuild and Final Walk

New insulation, drywall, venting, and any sistered framing go back in to California Building Code. We pull the permits, meet the inspector, and walk the attic with you at the end. You get the final moisture readings, the permit sign-off, and a written workmanship warranty before we pack up.

Tools & methods

Tools and Methods We Use on Attic Fires

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hot spots and hidden moisture behind drywall and under insulation that the eye cannot see. It is the first tool through the attic hatch on every job.

Moisture Meter

Reads the moisture content in framing and decking so we know when the assembly is actually dry. We log readings daily and do not pull drying equipment until the numbers hold.

HEPA Vacuum and Air Scrubber

Captures soot and ash particles instead of pushing them around. Paired with a negative air machine, it keeps the rest of the house clean while we work in the attic.

Hydroxyl Generator

Breaks down smoke odor molecules at the molecular level. Safe to run in occupied spaces, unlike ozone, and we run it 24 to 72 hours depending on the severity of the smoke.

Industrial Dehumidifier and Air Mover

Pulls the firefighting water out of the ceiling cavity and moves air through the assembly so mold does not get a foothold. Dri-Eaz and Phoenix Restoration Equipment units are our standard kit.

Soot Sponges and Degreaser

Dry sponges lift loose soot from framing and decking, and a degreaser cuts the protein residue that dry methods leave behind. Matching the method to the residue is what keeps the stain from setting.

Drywall Saw, Pry Bar, and Sledgehammer

Controlled demolition of the ceiling and any framing that cannot be saved. Every cut is photographed and logged before it happens so the scope and the claim stay accurate.

Real results

Before and after.

Recessed Light Fire in La Jolla Shores

Before

A recessed hallway light buried under 14 inches of blown-in insulation overheated and ignited the surrounding paper facing. The fire ran along two ceiling joists before the homeowner smelled smoke. Roughly 900 square feet of insulation was contaminated, and the firefighting water had soaked the ceiling cavity.

After

We pulled the insulation, sistered two joists, replaced 60 square feet of drywall, and dried the cavity to a 12 percent moisture reading over four days. The attic passed inspection on the first visit, and the new IC-rated fixtures can be safely buried.

Attic Fan Motor Fire in Mount Soledad

Before

A seized attic fan motor caught fire on a hot September afternoon and dropped burning debris onto the insulation below. The homeowner called at 11 p.m. after smelling smoke in a bedroom. The roof deck was charred across a 4-foot section, and the fan had been running on a circuit with no dedicated breaker.

After

We boarded up, shut the circuit, and replaced 32 square feet of roof decking. The new fan went in on a dedicated breaker, and hydroxyl generators ran for 48 hours to clear the smoke odor from the bedrooms below. The job wrapped in 11 days.

Knob-and-Tube Arc in Bird Rock

Before

A 1947 home had original knob-and-tube wiring arcing inside the ceiling cavity above a bedroom. The fire self-extinguished but charred three rafters and contaminated the insulation across half the attic. The homeowner found us searching for attic fire cleanup LA JOLLA and called the same night.

After

We treated the char, removed the damaged insulation, and sistered all three rafters. Lead-safe protocols went up before demo because of the age of the paint. The electrician rewired the circuit, and the attic passed inspection in 16 days.

Problems we solve

Attic Fire Problems We Solve in LA JOLLA

Most of the damage from an attic fire is not the burn itself. It is what happens in the days after, when soot, water, and smoke keep working on the house. Here are the problems we get called for most often.

Ask a pro →
01

Smoke odor lingering after fire weeks later

We remove the source material, HEPA vacuum the framing, and run hydroxyl generators for 24 to 72 hours. That breaks down the smoke molecules instead of covering them, and most homes come back odor-free without any fragrance at all.

↗
02

Soot residue on walls and ceilings that will not wipe off

Our techs match the cleaning method to the residue type, using dry soot sponges on dry soot and a degreaser on protein-based residue. We HEPA vacuum first so the particles are captured instead of pushed around the room.

↗
03

Water damage from firefighting efforts in the ceiling cavity

We extract standing water, then dry the cavity with industrial dehumidifiers and air movers before anything gets closed up. Daily moisture readings tell us when the assembly is actually dry, not just dry to the touch.

↗
04

Ash infiltration in the HVAC system

We inspect the ductwork and the air handler, seal the attic penetrations, and clean the affected runs. If the ductwork is contaminated beyond cleaning, we scope the replacement so it goes on the insurance claim.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
California CSLB B-General Building LicenseCalifornia Contractors State License Board
✓
California CSLB C-39 Roofing LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions About Attic Fire Restoration

(833) 929-6186 →

Most attic fire restoration jobs in this area run $4,500 to $28,000 in 2026, with a typical single-rafter electrical fire landing near $9,000. The low end covers soot removal, insulation replacement, and deodorization. The high end includes roof deck replacement, sistered framing, and new drywall. Your insurance carrier usually covers the whole scope minus your deductible, and we bill them directly.

We do, and we are local. Fire Damage Restoration La Jolla handles attic fire damage repair across La Jolla Village, Bird Rock, Mount Soledad, and the surrounding neighborhoods. Call (833) 929-6186 and a live person answers, day or night. We are licensed, insured, and we bring the thermal camera on the first visit so the scope is accurate from day one.

A typical attic fire takes 2 to 5 weeks from board-up to final inspection. Soot and debris removal runs two to four days, deodorization and drying run another three to five days, and the rebuild takes one to three weeks depending on permit timing with the city. Small, contained fires with no structural damage can wrap in 10 to 14 days.

Yes, standard homeowners policies cover fire damage to the structure and contents, including attic fire damage repair and smoke remediation. We work with every major carrier and scope the job in Xactimate so the numbers match what your adjuster expects. You pay your deductible and we handle the documentation, photos, and moisture logs the carrier needs to close the claim.

Ready when you are

Get Attic Fire Restoration in LA JOLLA, California Today

Every hour the soot sits, it etches deeper into the framing and the smell spreads further into the house. Call (833) 929-6186 and a live dispatcher will have a technician at your door the same day. Licensed, insured, and we document everything for your carrier.

Call Now (833) 929-6186 →
Request an appointment

Contact Our LA JOLLA Crew

Call (833) 929-6186 any hour for emergency fire damage restoration in LA JOLLA. We answer 24/7, dispatch same-day for board-up and water extraction, and schedule inspections within one business day for non-emergency scopes. Leave a message after hours and we call back within 30 minutes.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186